AKP Series of Wave Soldering Machine
Featuring an innovative U-shaped hot air preheater and reinforced internal thermal insulation, the AKP Series reduces heat loss to deliver up to 20% energy savings while maintaining lower machine surface temperatures for a safer, cooler work environment. Its external independent spray fluxer isolates flammable flux from heating zones to maximize shop-floor safety, combining imported precision atomization nozzles with heavy-duty titanium alloy conveyor claws to ensure uniform flux coverage and reliable, long-term transport performance.
The upgraded solder pot design incorporates quick-release nozzles that streamline routine servicing from hours to just minutes. Coupled with an anti-clogging grid mesh that extends maintenance intervals up to six months and an optional automated solder bar feeder to prevent wave height fluctuations, the AKP Series minimizes solder dross, optimizes thermal efficiency, and guarantees repeatable solder joint quality across demanding high-volume SMT lines
Technical Specifications
AKP-350-M Technical Specifications
Comprehensive technical specifications of the AKP-350-M Wave Soldering System engineered for reliable, high-efficiency PCB assembly.
| Model | AKP-350-M |
|---|---|
| Main Unit Dimensions (L×W×H) | 3945 × 1582 × 1735 mm |
| External Fluxer Dimensions (L×W×H) | 1300 × 1350 × 1595 mm |
| Power Supply |
3P5W 380V AC 50/60Hz Option: 3P5W 220V AC 50/60Hz |
| Power Consumption |
Warm Up Power: 30 KW Operating Power: ≤9 KW |
| Control System | PC + PLC Control System |
| Preheating System |
Hot Air / IR Preheating | 3 Zones Temp Range: RT–230°C | Control Mode: PID + SSR |
| Solder Pot Capacity & Temp |
Capacity: ~480 KG (Lead-Free) | Mechanical Pump Max Temp: 300°C | Warm-up Time: ~140 min (Set: 265°C) |
| Wave Drive Power | 1/4 HP × 2 |
| PCB Width & Transport Speed | 50–350 mm | 300–1800 mm/min |
| Component Clearance & Rail Angle |
Top 120 mm / Bottom 25 mm Rail Angle: 5.5°±0.2° (Adjustable 4°–7°) | Inlet Height: 750±20 mm |
| Fluxing & Exhaust System | Spray Flow: 10–100 ml/min | Up-down Convection | Air: 0.5–0.8 MPa |
| Cooling & N₂ System (Optional) |
Forced Air Cooling N₂ Consumption: 15 m³/h (<2000 PPM) | O₂ Level: ≤10 PPM |
Key Features
Advanced Features of AKP-350-M Wave Soldering
Delivering energy-efficient preheating, fast-maintenance solder pots, and high-precision flux application for modern SMT lines.
Energy-Saving U-Shaped Preheater
Features enhanced insulation and U-shaped heating elements that cut energy loss by up to 20% while keeping machine exterior temperatures low.
External Independent Spray Fluxer
Separates volatile fluxing operations from heat zones for enhanced safety, incorporating imported precision nozzles for uniform coverage.
Quick-Release Solder Nozzles
Designed with fast-disassembly wave nozzles that drastically reduce solder pot maintenance routines from hours down to minutes.
Anti-Clogging Mesh System
Optimized grid mesh limits dross blockages in the solder pot, extending required maintenance intervals up to six months.
PC + PLC Precision Control
Robust PC and PLC architecture utilizing PID+SSR closed-loop temperature control for consistent thermal profiles across all preheating zones.
Low-Consumption N₂ Support
Optional nitrogen protection system maintaining low oxygen levels (≤10 PPM) at an efficient 15 m³/h rate to reduce joint oxidation and dross.
